Adventure Australia

Adventure Australia Adventure Australia, off on our second trip, Simpson desert, bungles , the kimberly Broome and back.

ADVENTURE AUSTRALIA is all about getting the landcruiser all set up and decked out and hitching up the kimberly kamper to set off on a trip around the island we all call australia, for many people it is a life long dream to see as much of the awesome country, and were going to make it happen,
you will be able to follow our every move as we tackel many of the most well known and famious tracks and

places there is. our trip around australia ( LAP ONE ) will start in shepparton victoria at the start of march 2015
up untill then you will see the progretion of the truck and watch as we indever to set it up so as its as functional as possable,
you will also see photos of our little trips that will take place all around victoria in the build up to our (LAP ONE)

so share the page and sit back
cheers from ADVENTURE AUSTRALIA

Not a bad catch of yabbies on our way up through far western Nsw
16/05/2022

Not a bad catch of yabbies on our way up through far western Nsw

Big sky on our way up through central NSW
13/05/2022

Big sky on our way up through central NSW

Better go to qld
24/04/2022

Better go to qld

Starting to take shape now. Powder coated trimming back, door locks in, canvas installed, electronic actuators fitted to...
16/04/2022

Starting to take shape now. Powder coated trimming back, door locks in, canvas installed, electronic actuators fitted to pop the roof and a few more bits and pieces.

The fun stuff, we decided to use Victron gear in our camper. We are running a 3000 watt inverter charger it has 300 a/h ...
12/04/2022

The fun stuff, we decided to use Victron gear in our camper. We are running a 3000 watt inverter charger it has 300 a/h of deep cycle batteries and 1200watts of solar.

Starting to take shape now. installed and extra large pull out pantry. Also a slide at the back of the camper for the l...
10/04/2022

Starting to take shape now. installed and extra large pull out pantry. Also a slide at the back of the camper for the little things. awning mounted to the wall above door

Building the doors for the two gull wing boxes turned out taking longer then expected for some reason. However they are ...
04/04/2022

Building the doors for the two gull wing boxes turned out taking longer then expected for some reason. However they are bolted up and work. Cut out small door at the rear of camper.

Next job, add the roof panel into the pop top extrusion. With the use of the front end loader it much easier. And the al...
31/03/2022

Next job, add the roof panel into the pop top extrusion. With the use of the front end loader it much easier. And the aluminium angle was cut and notched ready to send to powder coating.

A hole cut to fit the access door for main camper and the pop top roof extrusion cut and fitted. A little daunting cutti...
31/03/2022

A hole cut to fit the access door for main camper and the pop top roof extrusion cut and fitted. A little daunting cutting these items as if I’m wrong it’s going to be a pain.

With all of the panels cut out we used sika flex to bond them together and some large screws as a temporary hold. Made 4...
29/03/2022

With all of the panels cut out we used sika flex to bond them together and some large screws as a temporary hold. Made 4 brackets to hold the jack legs and started on the aluminium storage area doors. And a quick test fit to the truck for fun

With a rough design scratched on to a piece of paper we marked out the panels and got stuck into it with the circular sa...
26/03/2022

With a rough design scratched on to a piece of paper we marked out the panels and got stuck into it with the circular saw. Making cut outs for future components. Also welded on some threaded bosses to mount the wind down legs on to in the future.

With the steel sub frame complete made of 50x50 x2.5 rhs, we went and picked up three 30mm composite panels. 7500mm Long...
25/03/2022

With the steel sub frame complete made of 50x50 x2.5 rhs, we went and picked up three 30mm composite panels. 7500mm Long and 2500mm wide. Let the fun begin with the slide on pop top camper build.

Address

Nathalia

Telephone

0437791757

Website

Alerts

Be the first to know and let us send you an email when Adventure Australia posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Adventure Australia:

Shortcuts

Share