Sheets Welding and Machine

Sheets Welding and Machine Currently booked. Full time welding and machine shop that specializes in antique Harley-Davidson’s

Replaced the legs and neck stem on this springer. The legs had been previously replaced with silicon bronze on the botto...
04/24/2026

Replaced the legs and neck stem on this springer. The legs had been previously replaced with silicon bronze on the bottom of the springer tree and easily came off. I like to tig weld them together above the tree with a plug welded internal sleeve, then slide full length chevrons in and braze everything together like factory. I think it’s a much stronger way.

Needed wishbones for this Panhead frame repair, made up the dies to make them, the wishbones are made from .120” wall do...
04/03/2026

Needed wishbones for this Panhead frame repair, made up the dies to make them, the wishbones are made from .120” wall dom steel tubing. I have the 48-49 tubes for $250 a pair and the 50 and up tubes with the horn mount flats for $300

01/21/2026

I make these brake crossover kits to repair your rigid mechanical brake frame. I have early or late versions. They’re $150 shipped

Did some exhaust work on this rare factory prototype overhead valve 45, replaced the rough Y pipe with a more original l...
01/18/2026

Did some exhaust work on this rare factory prototype overhead valve 45, replaced the rough Y pipe with a more original looking one.

Banged out some dents, replaced some bungs and recovered this original non vented seat pan
01/13/2026

Banged out some dents, replaced some bungs and recovered this original non vented seat pan

Sold original non vented seat that I recovered with aged brown leather ,
12/09/2025

Sold original non vented seat that I recovered with aged brown leather ,

11/08/2025

Oem style Harley springer replacement front legs, I make these in the early and late style from Dom steel tubing, also have XA lengths. Factory shape with the clam shell crimp and brazed reinforcement on the end. I can also straight knurl the upper end if you need a tighter fit. $200 a pair.

For sale, Nice left side Atlas bag and K-model wheel.Atlas bag is in nice usable shape, has two very small holes and ac...
10/10/2025

For sale, Nice left side Atlas bag and K-model wheel.
Atlas bag is in nice usable shape, has two very small holes and acouple of the rivets have come loose on the lid. I would run it as is or send it to . Asking $550 plus shipping.
K-model front wheel. Asking $500 plus shipping. Located in Hagerstown Maryland

For sale. Nice 1939 big twin springer, #4 front leg. Has original front and rear legs, Original tabs , mounts and neck ...
09/12/2025

For sale. Nice 1939 big twin springer, #4 front leg. Has original front and rear legs, Original tabs , mounts and neck stem. Straight and completely rebuilt with Colony bushings, studs and spring rods, asking SOLD

1942 #8 big twin front leg, nice and straight with new colony spring rods. Asking sold
Both are ready to use, can ship from Maryland or deliver to the AMCA Upperco meet

Added some casting numbers to this aftermarket Panhead neck
09/01/2025

Added some casting numbers to this aftermarket Panhead neck

A few recovers
08/29/2025

A few recovers

Address

Hagerstown, MD
21740-21749

Website

Alerts

Be the first to know and let us send you an email when Sheets Welding and Machine posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share