Solo Sabers, LLC.

Solo Sabers, LLC. Solosabersllc.com

05/29/2026

Mace Windu test fire

Here is an 89 Mace Windu finished up for Michael...This was installed with a goth master chassis holding a Proffie v3, 2...
05/29/2026

Here is an 89 Mace Windu finished up for Michael...

This was installed with a goth master chassis holding a Proffie v3, 20mm speaker, 2 different crystal chambers, removable battery/kill switch.

Here is an 89 Sabers Scrapflex finished up for Dan...This was installed with a CFX, 28mm speaker and KR lit pcb with a r...
05/29/2026

Here is an 89 Sabers Scrapflex finished up for Dan...

This was installed with a CFX, 28mm speaker and KR lit pcb with a removable 18350.

The handle on this one is quite short making the install a little interesting.

There are also two different options for switches but I went with the traditional Graflex red button/slide tab combo as opposed to the two plungers in the middle of the hilt.

Here is a custom Scrapflex finished up for Matthew...Matthew sent the Scrapflex to me for a custom removable chassis wit...
05/28/2026

Here is a custom Scrapflex finished up for Matthew...

Matthew sent the Scrapflex to me for a custom removable chassis with a crystal chamber I machined for him out of aluminum and brass... as well as two brass accent rings where he will put a leather wrap between. The picture shows them plain but they have since been laser engraved.

Proffie v3, 28mm speaker, removable 18650/kill switch.

Here is a KR Sabers "Desert Wanderer" finished up for Carey...This has been installed with a KR/JSJ Eco chassis holding ...
05/27/2026

Here is a KR Sabers "Desert Wanderer" finished up for Carey...

This has been installed with a KR/JSJ Eco chassis holding a Proffie v3, 28mm speaker, removable battery and two sets of KR lit pcbs.

05/27/2026

Catching up on a Desert Wanderer

Good morning folks- I'm back in the office, what a weekend!Today I'll spend most of the day unpacking commissions that c...
05/27/2026

Good morning folks- I'm back in the office, what a weekend!

Today I'll spend most of the day unpacking commissions that came while I was gone and reaching out to their respective owners to let them know all is here safely... then getting right back to it.

Thank you for your patience!

MTFBWY

Here is a Creepy Uncle finished up for Julius...This was installed using the very nice KR Sabers/JSJ Eco CC chassis hold...
05/22/2026

Here is a Creepy Uncle finished up for Julius...

This was installed using the very nice KR Sabers/JSJ Eco CC chassis holding a Proffie v3, 28mm speaker, crystal chamber, removable battery with kill switch.

This will be the last install I can fit in until I get back from vacation on Tuesday evening, hope you all have a wonderful weekend and make it out to see The Mandalorian and Grogu- I saw it last night and really enjoyed it.

05/21/2026

Still the saber that gets picked up the most

Here is a Korbanth Bane finished up for Dylan...This was installed with a Proffie v3 and 28mm speaker with long pin lit ...
05/21/2026

Here is a Korbanth Bane finished up for Dylan...

This was installed with a Proffie v3 and 28mm speaker with long pin lit blade connector and crystal chamber holding a real quartz and a 3-pixel accent pcb.

05/20/2026

Special thank you to my dude Dale for picking up my current 2.0 SK project...

I've done a lot of work for Dale and I'm happy to see it go to him. 🙌

Address

Miami, OK

Website

Alerts

Be the first to know and let us send you an email when Solo Sabers, LLC. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Solo Sabers, LLC.:

Shortcuts

Share