GoDpsInk

Name: GoDpsInk
Address: 810 Lawrence Drive, Ste 128, Newbury Park, CA, 91320, US
Telephone: +18883554377

A one stop ship for all your printing needs. Unsurpassed quality, reliability, and innovation are GO-DPS's primary focus.

GO-DPS has been a leader in the sale and distribution of printing supplies world-wide since 2003. We strive to provide our customers with the best products available in the industry, as well as the best possible service. GO-DPS has established an alliance with American Forests Organization, in 2009 and has successfully planted over 1,500 trees and prevented over 3.5 million printer cartridges fro

m ending up in our nation's over burdened landfills. With each compatible cartridge purchase, a donation to American Forests will be made.

11/07/2012

WIN IT WEDNESDAY CAPTION CONTEST!
Win $25 towards Go DPS Ink

Like Share and POST YOUR BEST CAPTION TO THIS PHOTO.

One Winner and one runner up will be with the best caption will win. Contests ends at 8am 11/8.

One post per person, you must be 18 and a US resident to win. Winners will be announced on this post at 8am pst/11am est, so make sure to check back. GOOD LUCK!

http://www.go-dps.com/b/3225624011/

11/02/2012

GoDpsInk Tip of the Day

CHECK YOUR PRINT LAYOUT

First of all, take note of the layout options you have. You may be able to print several pages on a single piece of paper or you may be able to print on both sides of a paper. Both options can save a ton of ink/toner and even paper. Please remember that if you change settings here, every print job will be printed like this per default. So keep in mind the options you have here for those special cases.

PLEASE LIKE AND SHARE THIS POST

Click here for the best deals on Ink and Toner:
http://www.GoDpsInk.com

11/01/2012

GoDpsInk Tip of the Day

USE PRINT PREVIEW

Before you print anything, make use of the preview option and check whether things look good. At this point you may decide to manually change the settings, for example print several pages on one piece of paper, reduce the size of an image etc.

PLEASE LIKE AND SHARE THIS POST

Click here for the best deal on Ink and Toner:
http://www.GoDpsInk.com

10/31/2012

HAPPY HALLOWEEN!

Fly safe tonight!

Click here for the best deals on Ink and Toner:
http://www.GoDpsInk.com

10/30/2012

GoDpsInk Tip of the Day

PRINT TIL IT DIES

Don’t be alarmed if your printer reports that ink or toner are empty. Chances are you have 10-30% lifetime left. So keep printing until the printer stops. However, don’t waste time and make sure you get replacements in the meantime.

PLEASE LIKE AND SHARE THIS POST

Click here for the best deal on Ink and Toner:
http://www.GoDpsInk.com

10/29/2012

GoDpsInk Tip of the Day

EXTEND TONER LIFETIME

For laser printers, many recommend to shake the toner cartridge to extend its lifetime and get the last bit of toner out of it. For me this has never worked. But since toner basically is powder it may indeed form clumps as it gets old, it may actually work on old cartridges.

PLEASE LIKE AND SHARE THIS POST

Click here to get the best deal on Ink and Toner:
http://www.GoDpsInk.com

10/26/2012

GoDpsMusic is giving away $4000 worth of Music Gear to Drummers and Guitarists. One lucky guitarist will receive an ENTIRE GUITAR KIT with the PRS SE Custom Semi-Hollow Vintage Natural Electric Guitar as the top prize! Click on this link to sign up today!

http://www.facebook.com/DPSMUSIC/app_174927749225665

10/26/2012

GoDpsInk Tip of the Day

TURN YOUR LASERJET ON AND OFF MANUALLY

To save energy, turn your printer on only when you need it! And to keep the ink from drying out, turn the printer off manually. Don’t use the power strip! Using the manual on/off button activates a program and the printer will properly “park” the ink cartridges. In the park position the ink is protected from drying out quickly.

PLEASE LIKE AND SHARE THIS POST

Click here for the best deal on Ink and Toner:
http://www.GoDpsInk.com

10/25/2012

GoDpsInk Tip of the Day

KEEP AN ELECTRICITY FLOW ON INKJET PRINTERS

In general, inkjet printers require a steady stream of electricity. Now if you completely disconnect your inkjet printer from electricity, for example by using a power strip that can be switched off, the printer will go through a cleaning cycle once electricity is back. If repeated on a daily basis, this procedure not only costs energy, but also tons of ink.

PLEASE LIKE AND SHARE THIS POST

Click here for the best deal on Ink and Toner:
http://www.GoDpsInk.com

10/24/2012

GoDpsInk Tip of the Day

REDUCE STOP/START CYCLES

If you are using a laser printer you may notice that the printer does some whirling before and after every printed document. If you are printing a single page the printer goes through a start-up cycle, prints the page, and then goes through the slow-down cycle. The additional time and turning incurred during the start-up and slow-down cycles can greatly wear out the components inside your toner cartridge causing to lighter printing and increases the likelihood of developing defects. While no printing is occurring, the components in your printer and cartridge spin just as if something was being printed. In addition, toner continues to accumulate on the drum even though there is no printing. This extra toner is swept into the waste-bin of the cartridge, reducing the supply of toner available for printing.

Of course, if you only need to print a single page, there is no way around this issue. However if you are printing a document with many pages and you notice that your printer keeps stopping and re-starting during the output of the document (meaning that your computer is not keeping up with the printer), there is an opportunity to reduce stop/start cycles. This could occur if you are printing documents from your accounting software for the year end taxes. The computer may need to crunch numbers before the page is ready for printing.

To reduce stop/start cycles use the Printer Properties | Advanced tab and tell the computer to start printing after the last page is spooled. Typically this setting is set to start printing immediately to improve user experience and reduce the perceived wait. When you change this setting, your document will start printing when the computer is done generating the entire document, so there will be an initial delay between the time you start your print job and the time the print job starts printing on the printer.

This setting will reduce the number of times your printer needs to stop and wait for the computer to generate more pages.

PLEASE LIKE AND SHARE THIS POST

Click here for the best deal on Ink and Toner:
http://www.GoDpsInk.com

10/23/2012

GoDpsInk Tip of the Day

SAVE YOUR COLOR CARTRIDGES FOR COLOR

In general, color cartridges cost more to run than monochrome (black). Therefore, if you are printing a document which has no color you would think that the printer would just use the black cartridge, but this may not always be the case. The color used in the document could appear black to you, however, could slightly be off-black. When this happens, your printer tries to use the combination of black and color cartridges to match the color your computer is sending it. If you are printing something that should be black, tell your printer to print everything in black and white or gray-scale. This will tell your printer to not worry about matching exact color and just use the black cartridge for your entire document.

Even though you may tell your printer to only use black, most HP and Canon laser printers continue to use color cartridges anyway. This will slow down the usage of the color cartridges but not stop them completely in these printers. So, while having a color laser printer is great for when you really need to print something in color, buying a low cost black and white only printer is the better option since you would not need to use your color printer at all when only printing black.

PLEASE LIKE AND SHARE THIS POST

Click here for the best deal on Ink and Toner:
http://www.GoDpsInk.com

10/22/2012

GoDpsInk Tip of the Day

REDUCE OUTPUT RESOLUTION ON LASER PRINTERS

Just like the "Draft" mode on an inkjet printer, laser printers have "Resolution" a setting. At lower resolutions less toner particles are used to create the image. As a result, the printed output may be not as dark as it may be at higher resolutions. If your printer is currently set to use resolution of 600 or 1200 DPI, try changing it to use 300 DPI. Not only will you use less toner, but your printer will print faster.

PLEASE LIKE AND SHARE THIS POST

Click here for the best deal on Ink and Toner:
http://www.GoDpsInk.com

Address

810 Lawrence Drive, Ste 128
Newbury Park, CA
91320

Telephone

+18883554377

Website

http://www.go-dps.com/

Alerts

Be the first to know and let us send you an email when GoDpsInk posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to GoDpsInk:

Shortcuts

Want your business to be the top-listed Transport Service in Newbury Park?