Reef 'n Reel

Reef 'n Reel Boat and trailer maintenance, servicing, rewire boats and trailers, electronics installs, auto pilot installation etc. Mackay & Whitsunday Region

Bilge pump replacement and re-wired non working lights
08/08/2026

Bilge pump replacement and re-wired non working lights

A little tidy-up and improvement to this boat’s cabling. I secured and routed the cabling, cleaned up the connections an...
08/08/2026

A little tidy-up and improvement to this boat’s cabling.

I secured and routed the cabling, cleaned up the connections and added protection where needed, giving everything a much neater finish.

Customer bought a boat and wasn’t getting a good bottom reading when underway…Took a look and found the transducer brack...
08/08/2026

Customer bought a boat and wasn’t getting a good bottom reading when underway…

Took a look and found the transducer bracket had been mounted upside down, with a extension plate being used to get the extra reach.

Not exactly the ideal setup, especially when you’re relying on your sounder to read properly at speed.

So we did what needed to be done, sorted the mounting and got the transducer sitting where it should be.

Now she’ll read the bottom properly when underway.

Sometimes the problem isn’t the sounder settings… rather how the transducer is mounted.

Some work done on a 7m Yellow Fin. Corrosion removed, aluminium wash to etch, treated and sealed. Placed a HDPE protecti...
25/07/2026

Some work done on a 7m Yellow Fin. Corrosion removed, aluminium wash to etch, treated and sealed. Placed a HDPE protection piece for anchor chain whip not to further damaged the paint and seperate the stainless from Aluminium. Drilled and taped all bolt holes finishing it off with counter sunk bolts, Tef gel applied to prevent further issues. Also installed and splash guard over the 1Kw transducer, refit and correctly positioning the transducer as it wasn’t performing as it should.

If your boat needs corrosion repairs, fabrication, maintenance, transducer installation, or other small repairs, feel free to send me a DM.

Happy to help get your boat back in top condition.⚓️

Another 1kW transducer installation completed successfully this week. I also carried out some fault finding on the custo...
08/07/2026

Another 1kW transducer installation completed successfully this week.

I also carried out some fault finding on the customer’s battery distribution system after noticing charging issues.

The issue was traced to a faulty Voltage Sensitive Relay (VSR), which was not switching correctly to charge the house battery. Unfortunately, this left the house battery in a critically low state.

* ✔️ Diagnosed the faulty VSR.
* ✔️ Charged all batteries to restore the system.
* ✔️ Confirmed the VSR requires replacement.
* ✔️ The VSR will be replaced under warranty by the previous installer.

Sometimes a job uncovers more than what was originally booked for, but identifying these issues before they become bigger problems is all part of providing reliable marine electrical service.

Another great project completed! I recently had the pleasure of working on this impressive 8m Surtees Hardtop Plate Alum...
03/07/2026

Another great project completed!

I recently had the pleasure of working on this impressive 8m Surtees Hardtop Plate Aluminium Boat in Yeppoon.

The job included:
- New 1Kw transducer mounted and repositioned
existing Garmin transducer for more accurate
sounding
- Sounders updated & tested
- Bilge pump auto float switch installation
- Sacrificial anodes added to protect the boat from
electrolysis
- Professional wiring and system integration

Thanks to the owner for trusting us with such a fantastic vessel. It was a pleasure to get her ready for many more days on the water!

📍 Yeppoon, QLD

Before & After This customer’s fuel filter setup was showing its age, with worn hoses and components that were due for r...
09/06/2026

Before & After

This customer’s fuel filter setup was showing its age, with worn hoses and components that were due for replacement. We’ve now fitted a fresh filter assembly, new fuel lines, primer bulb, and clamps, giving them greater reliability and peace of mind before their next trip.

Whether you’re heading offshore chasing reefies or spending the day trolling for pelagics, preventative maintenance can save you from costly breakdowns and lost fishing time.

📲 Get in touch for boat servicing, repairs, upgrades, and maintenance.

01/06/2026

Repair. Restore. Reimagine.

Specialising in boat maintenance, repairs, refurbishments, redesigns and restyling.

Turning tired vessels into something exceptional.

Message us for a quote.

Another corrosion protection job completed. ✔️ Did you know corrosion can attack your boat even when everything looks fi...
29/05/2026

Another corrosion protection job completed. ✔️

Did you know corrosion can attack your boat even when everything looks fine on the surface?

This corrosion protection system is designed to sacrifice itself before your boat’s important metal components do.

A small investment that can save a lot of money down the track.

Need help with boat maintenance, fitting accessories, or protecting your investment? Send us a message.

28/05/2026

Keeping boats reef-ready, one fit-out at a time.

Send me a DM for all your boat maintenance needs.
Clinton

Address

Blacks Beach
Mackay, QLD
4740

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm
Sunday 8am - 5pm

Telephone

+61457683107

Website

Alerts

Be the first to know and let us send you an email when Reef 'n Reel posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Reef 'n Reel:

Shortcuts

Share

Category