Okanagan Anchor

  • Home
  • Okanagan Anchor

Okanagan Anchor Okanagan Anchor Specializes In:
- Mooring Anchors
- New & Used Anchors
- Rope Splicing
- Marine Anti

Today we finished a sauna handle for a customer. What a great idea and functional. Thanks for the business!
06/10/2022

Today we finished a sauna handle for a customer. What a great idea and functional. Thanks for the business!

Mooring pendants for a 36’ Hunter. 7/8 polysteel with 8-1/2 ton load rated shackles. They are 12’ long with anti-chafe g...
11/07/2019

Mooring pendants for a 36’ Hunter. 7/8 polysteel with 8-1/2 ton load rated shackles. They are 12’ long with anti-chafe guards for the deck. Thanks for the business!

Rigged up a custom inflatable tube filler. This is a rubber valve stem from a car wheel. Fits snugly into the air valve ...
20/06/2019

Rigged up a custom inflatable tube filler. This is a rubber valve stem from a car wheel. Fits snugly into the air valve and made filling the tube a breeze without any special fittings.

Rope to chain splice with 200’ of ISO G4 chain and 250’ of 5/8 Samson 3-strand for mister customers windlass setup. Than...
20/06/2019

Rope to chain splice with 200’ of ISO G4 chain and 250’ of 5/8 Samson 3-strand for mister customers windlass setup. Thanks for the business Larry!

First splice of the season! Customer was looking for a twin anchor lock set up for both bow and stern. Apparently it wor...
15/05/2019

First splice of the season! Customer was looking for a twin anchor lock set up for both bow and stern. Apparently it works really well as you have more control over your fishing boat. @ West Kelowna

Need a mooring line? Leftover clearance for January and February!
26/01/2019

Need a mooring line? Leftover clearance for January and February!

Last week I had to disassemble the carburetor bank on the shop boat. Wasn’t running very well and not firing on  #2 and ...
07/08/2018

Last week I had to disassemble the carburetor bank on the shop boat. Wasn’t running very well and not firing on #2 and 4. Of course the pilot circuits were plugged and the bowls were dirty. Also found a couple of spider legs in on carb... how does that happen?

Sunday boat cruise! A full 16 hours on the lake... good times!
07/08/2018

Sunday boat cruise! A full 16 hours on the lake... good times!

Your typical work in progress picture. Need some mooring pendants? No problem! We got you covered!                      ...
07/07/2018

Your typical work in progress picture. Need some mooring pendants? No problem! We got you covered!

Custom mooring pendants for a 36’. Shackle/Thimble combo on the far end 7/8” line 14’ long with two jumbo snubbers and a...
13/06/2018

Custom mooring pendants for a 36’. Shackle/Thimble combo on the far end 7/8” line 14’ long with two jumbo snubbers and a splice to fit the customer boat, also added anti-chafe protection to keep the gel nice on the boat. The shackles are load rated at 6-1/2 tons. Wish we got to build the anchor for this setup, but maybe next time. I thank you for the business!

Today we built a custom 2 piece mooring line for a 280 Sundancer to make mooring a breeze. It’s Y shaped is designed to ...
16/05/2018

Today we built a custom 2 piece mooring line for a 280 Sundancer to make mooring a breeze. It’s Y shaped is designed to fit the 10” cleats on the bow with a stainless snap hook. The second half gets clipped on the buoy when you back the boat up to it for easy mooring. The grab handle on the other end is easy to hang on to while you swing the boat around and connect it to the Y line. Equipped with a float in case the line gets dropped. Easy and simple. Also added some anti-chafe protection. Thanks for the business!

Address


Alerts

Be the first to know and let us send you an email when Okanagan Anchor posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

  • Want your business to be the top-listed Transport Service?

Share