https://www.facebook.com/273064649228421/

Railway maintenance equipment

Home
China
Wuhan
Railway maintenance equipment

We are a professional manufacturer of railway track inspection equipment from China.

Our products: small track maintenance machines, different rail tools, railway measuring equipment, Cummins diesel engines,

22/11/2024

Mechanical track jack provides low handle effort. Can be used for lifting (vertical) or pushing (horizontal) applications.
Forged and heat treated components for strength and long service life. Does not accept lining bar for handle.
Does not accept lining bar for handle
Specifications
Lifting Capacity: 5-ton
Stroke 10"
Minimum Toe Height: 1.75"
Minimum Cap Height: 17"
Weight: 30 lbs.
Contact: TracyYu
Phone: 0086-15629329909
Email: [email protected]

20/11/2024

FROG Vertical Wear Gauge(LJ-JXC)

Frog vertical wear gauge is used to measure vertical wear value of frog point rail and wing rail at any sections.
Also could be used for measure the decrease value of point rail relative to wing rail.
It has the advantages of high measuring accuracy, easy to operate, high reliability, small volume, light weight etc.

Model: LJ-JXC
Type: Digital
Measure range: 0-40mm
Main ruler scale: 0mm-380mm
Score value: 0.01mm
Accuracy: 1mm
Working temperature: -10°C-+40°C

Contact: TracyYu
Whatsapp: 0086-15629329909
Email: [email protected]

18/11/2024

Railway track gauge calibrator

28/10/2024

How to use measure the rail web width?

1.Take the rail web width measuring device out of the box, put the measuring ends of the two measuring rulers 1 and 2 close together, and press the zero keys of the two digital display rulers respectively; After that, pull the two rulers to the farthest end；

2.Place the positioning block close to the rail jaw which outside the rail to be measured (non-acting side), and then rotate and place it on the rail head. Push the measuring device to make two working sides of the positioning block close to the rail non-working side and the rail jaw side.

3.Meausring：After positioning the instrument, push the two measuring rulers 1 and 2 toward the rail web, so that the measuring end of the rulers is close to the rail web;

4.Reading and calculation: read the measured data of the two measuring rulers 1and 2 respectively, and add the absolute value of the two measured data to be the measured value of the rail web width;

5.After reading, calculation, recording, the two measuring rulers 1 and 2 are pulled to the far end, and the direction of the opposite rotation of the next, do not pull so as not to damage the instrument measuring ruler.

21/10/2024

E clip railway fastening system is very mature fastening system that can be used in almost all kinds of rail sections for many features. And now E-clip railway fastening systems are widely used in railway projects all over the world. In general, a complete E-clip railway fastening system is composed of two elastic rail clips, two rail shoulders, one rail pad and two rail insulators.

15/10/2024

Battery operated Rachet

Rated Voltage：21V

Chuck size: 3/4 square head, 55mm socket

No load revolution: 0-3500r/min

Max torque: 1580N.m

Torque : Adjust by pressing the switch strength

Impact rate: 0-2800/min

Motor: brushless electric machine

Weight: 3.1kg

24/09/2024

The body of the digital track gauge is made of aluminum alloy I-shaped profile and consists of four parts: mechanical part, electronic measuring instrument (including ultra-height sensor), displacement sensor, battery and charger. The measuring instrument is installed on the groove of the ruler body, close to the side of the movable probe. The height and width of the instrument box are slightly larger than the ruler body. The ultra-height sensor is in the instrument case, the displacement sensor is under the left side of the instrument box, and the battery box is in the middle of the ruler.

11/09/2024

RAIL ALLIGNMENT TOOL

The Rail Alignment tool is suitable for the adjustment of various rail types and is an essential
tool for adjusting the position of the rail during thermit welding.
Maximum hanging rail force: 15kN Span: 460mm Machine quality: 21kg Dimensions: 600×540×170

If you have any interest, pls contact my whatsapp 0086-15629329909 or email: [email protected]

09/09/2024

The tip rail lowering value measuring instrument is used to measure the lowering value of the tip rail relative to the basic rail and the lowering value of the center rail relative to the wing rail.

A high-precision displacement sensor is used for contact measurement. The measuring head can move laterally along the guide rail to meet the measurement needs of different horizontal positions. The high-precision acquisition module can improve operating efficiency and ensure the quality and technical indicators of turnout construction and maintenance.

The product is divided into two parts: the main unit and the bracket. A single main unit measures the data between the wing rail and the center rail through a displacement sensor; after the bracket is connected to the main unit, place the product on the basic rail surface, and the displacement sensor on the main unit can also measure the basic rail and tip rail. The data measured between the two rails are processed and stored through the program. The measurement results can be viewed directly on the host computer, or the data can be organized into an Excel table and viewed on the computer.

05/09/2024

Gt-20 Digital Ultrasonic Rail Flaw Detector

Address

中国
Wuhan

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Railway maintenance equipment posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Want your business to be the top-listed Transport Service in Wuhan?