Crouch Engineering

Crouch Engineering Marine engineering services, including, machining, fabrication, welding, hydraulic, manufacturing.

Lincoln sp170 240v might welder. Gas & Gasless. New Euro lance, new heavy duty earth cable. Can come with gas regulator....
05/02/2024

Lincoln sp170 240v might welder. Gas & Gasless. New Euro lance, new heavy duty earth cable. Can come with gas regulator. Ideal site welder. Has 16amp plug but can by run on a 13amp plug. Only smelly sure to buying a new site welder. £350

Seadoo XP jet ski. Been in a barn for 8 years. Turns over, has a spark. Not tried to start it as the fuel system needs c...
15/01/2024

Seadoo XP jet ski. Been in a barn for 8 years. Turns over, has a spark. Not tried to start it as the fuel system needs cleaning. In a tidy trailer. OFFERS

Single phase only saw, any use to anyone?
15/01/2024

Single phase only saw, any use to anyone?

FOR SALENew old stock Torkmaster v3 vertical windlass. Built to Super Yacht spec. All machined from 316 stainless steel ...
27/11/2023

FOR SALE

New old stock Torkmaster v3 vertical windlass. Built to Super Yacht spec. All machined from 316 stainless steel billet. 16mm stud link chain gipsy. Max pull
Depending on drive 10ton
This is the unit only without gearbox or drive. We can supply this unit finished with ether hydraulic or electric power. This is the same as the commercial v3.
Contact for more information

A little water injection exhaust bend that we were asked to re manufacture. We used the original exhaust/turbo fl**ge & ...
26/11/2023

A little water injection exhaust bend that we were asked to re manufacture. We used the original exhaust/turbo fl**ge & the original exhaust outlet. The rest we replaced in stainless steel.

Half way through cockle season the ‘Charlotte Joan’ lost drive on their gearbox. Fortunately they had a spare gearbox. W...
12/11/2023

Half way through cockle season the ‘Charlotte Joan’ lost drive on their gearbox. Fortunately they had a spare gearbox. Working along side Tim & Robin, We removed the old box, fitted the replacement & was back up & running within two days.
We have over 25 years experience in the marine industry.
Supplying & fitting commercial & pleasure boat engines gearboxes & propulsion.

One of our old t350/25hp commercial bow thrusters in for rebuild. We manufactured & supplied this unit around 18 years a...
12/11/2023

One of our old t350/25hp commercial bow thrusters in for rebuild. We manufactured & supplied this unit around 18 years ago. This was its first rebuild. Not bad for a unit that has spent all of it life under water.
We can still produce supply & manufacture commercial Bow Thrusters to order.

At the beginning of the year we was asked to produce a 4000kg hydraulic winch to replace the existing winch on the end o...
12/11/2023

At the beginning of the year we was asked to produce a 4000kg hydraulic winch to replace the existing winch on the end of Marconi Saling Clubs Slipway. This is what we supplied, manufactured & fitted.
We have over 25 year experience in supplying, manufacturing & installing hydraulic components.

Hydraulic flow & pressure test carried out on ‘Jumbo’ for Predator Charters. His winch was not pulling the correct load....
12/11/2023

Hydraulic flow & pressure test carried out on ‘Jumbo’ for Predator Charters. His winch was not pulling the correct load. We soon sorted that problem out……..
We have over 25 years experience in hydraulic system design & installation.

Swapping out a hydraulic change over valve for aDirectional hydraulic control valve for Marconi Saling Club
12/11/2023

Swapping out a hydraulic change over valve for a
Directional hydraulic control valve for Marconi Saling Club

A diff holding tool we was asked to make to for a 7” Ford diff.
12/11/2023

A diff holding tool we was asked to make to for a 7” Ford diff.

Address

Sea End Boathouse
Burnham On Crouch
CM08AN

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+447554883419

Website

Alerts

Be the first to know and let us send you an email when Crouch Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category