Crystal infotech Computers/Technology

05/08/2013

21/07/2013

(POLY) CE,ME,AE,ET ENGG. STUDENT
SUB. AUTO CAD (2D & 3D)
CONTACT:- 8698235504
PLACE:- CRYSTAL INFOTECH DESHMUKH COMPLEX LAKHALA WASHIM.
NOTE:- (FEE 2000/- only)

04/06/2013

Tips to recover scratched CD's
1. Spread a cloth on a flat surface and place the CD on it.
2. Then, hold the disc with one hand, use the other to wipe the polish into the affected area with a soft cloth.
3. Wait for it to dry and buff using short, brisk strokes along the scratch, not across it.
4. A cloth sold to wipe spectacles or camera lenses will work super m8's.
5. When you can no longersee the scratch,, wash the disc with water and let it dry before playing. Intersting isnt it? Try it right now
I have used toothpaste with good effects before Ive also used car paint cutting compound on deeper scratches. It does leave lots of smaller scratches (as it is a cutting compound after all) but it will remove the worst scratches in most cases.
ya u r gng to b surely befinited by this Operation

* Fingermarks/prints cause 43% of disc problems!
* General wear & tear causes 25% of disc problems!
* Player-related issues cause 15% of disc problems!
* Remaining Others

04/06/2013

Add Your Name (or) Application to right click Of My Computer
Caution ..
As it is related to Windows regisrty it can be dangerous
so,Try This at ur own risk

To write your name on right click application
please follow the steps.

1.Copy/Paste the following code in Notepad And then Save it as .reg

Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor]
@="Your Name Or Name of the Application"
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command]
@="Location Of The Application"

2.Now edit it and then Type your name In

Eg:

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor]
@="Rajesh"

3. If u want to get any application, once you click Your name or name of application
Then , Type the location Of the application Which u want to open In:

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command]
@="Location Of The Application"

For eg.C:\Program Files\Yahoo!\Messenger\messenger.exe
Thats It finally save it And then Run it .

------------------------------------------------------------
To add Application Control Panel

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Control Panel\command]
@="rundll32.exe shell32.dll,Control_RunDLL"

To add Application Add/Remove

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Add/Remove\command]
@="control appwiz.cpl"

To add Application Reboot

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Reboot]\command]
@="shutdown -r -f -t 5"

To add Application Shutdown

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Shutdown]\command]
@="shutdown -s -f -t 5"

04/06/2013

How to "Delete administrator Password" without any software
Method 1

Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.

Method 2

Step 1. Put your hard disk of your computer in any other pc .
Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ).
Step 3. Then open that drive in which the victim’s window(or your window) is installed.
Step 4. Go to location windows->system32->config
Step 5. And delete SAM.exe and SAM.log
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer :-)

04/06/2013

How to Create Folder "CON"
Ever tried to create a folder "CON" or "AUX" or "NUL".

Tried now??? - not working :)

Here you go, a simple method to stop your anxiety

Rename folder from the right click option........
Now press alt and press 255...
press 255 frm the right side of the key bords i.e, Num pad.
where only numbers are given.....
now write con and then press enter.....yayyy!!
you ll see a con folder in ur pc
and also you can delete it easily.

04/06/2013

All (Ctrl+Alt+Del) Permanently deleted files Recovery solution
Sometimes we delete the files permanently, and realize that deleting them is like a Blunder...

For all those folks,
Here is the solution

Software called "Kissass Undelete" , can bring those files from the hard disk or your flash drive.
Conditions : Only if the data on that drive is not re-occupied(or written). that means the space which was available after the deletion is not been occupied after the deletion.

Click Here to download the .

1)
To start searching for the files,
Select the drive from the Left panel of the Windows and Click the scan button.
the Scan might take upto 10 secs.

2)
When the files search has been completed, it will show you the results with the name, typ, size and the last modified date of the searched file.

3) Now you can select the file to be recover. This is an Open source application and available for All Windows OS(Windows XP/Vista/ 7).

16/04/2013

DOS and Windows command line Top 10 commands

Below is a listing of the top 10 MS-DOS commands most commonly used and that you will most likely be using during a normal DOS session.

cd
dir
copy
del
edit
move
ren (rename)
deltree
cls
format

Top 10 command pages

Below is a listing of the top 10 MS-DOS command pages by the amount of times they have been accessed on the Computer Hope server.

xcopy
copy
dir
net
format
del
attrib
cd
ping
set

16/04/2013

Automate your work with Autohotkey

Autohotkey is a free and powerful tool that allows you to automate almost anything on your Windows computer in any program. Computer Hope uses this tool daily to help answer common questions asked in e-mail quickly and perform other common repetitive tasks. If you do anything daily that requires you to repeat the same actions, we highly recommend using this tool. This page demonstrates some of this programs capabilities

16/04/2013

er the same text into multiple Excel cells at once

Same text into multiple excell cellsIn Microsoft Excel, you can enter the same data or text into multiple cells at once using the below simple steps.

Highlight all the cells that you want to have the same text.
Type the text you want.
When done instead of pressing enter press Ctrl+Enter.

After completing the above steps, the text will automatically be entered into all highlighted cells. This tip can be very useful any time you have data that has the same prefix and just need to add something to the end of each cell.

For example, the above steps were been done to create "computer hope" in all the cells as shown in the picture to the right. Once completed, I could press F2 on a selected cell, go to the end, and add "1" to make the cell "computer hope 1". I could keep doing this to have computer hope 1 through 16.

16/04/2013

Define names and use them in Microsoft Excel

Microsoft Excel allows any cell to to have a defined name, which makes creating and pointing to that cell a lot easier. For example, in a traditional formula you may subtract the value in cell A1 from B1 by using the formula =sum(A1-B1) in cell C1. However refrencing these cells and using them in a formula could be made easier by defining the name of cells C1 and B1. For example, cell A1 could be named "total" and cell B1 could be named "tax", which means the same formula in C1 could be =sum(total-tax) to get the total.

To create a defined name for any cell right click the cell and choose Define Name, once clicked a New Name window, like the one shown below should appear. Fill out the name you want to use and click Ok.