Marsden Cove Marine Ltd.

Marsden Cove Marine Ltd. Marsden Cove Marine offers qualified Marine System Engineers with Experience and factory backed trai

'Tis the season for new Re-riggig! Finished the last sea trial on a 300hp twin rig with joystick, and the boys are flat ...
26/11/2025

'Tis the season for new Re-riggig!

Finished the last sea trial on a 300hp twin rig with joystick, and the boys are flat out getting another couple of rigs done with a Ramco getting a new 115 Pro XS full new Electronics package and rewire! And a new 150 Pro XS going on in the background and a bit of basic electrical work, A 60hp tiller confirmed thismorning and this 6hp has just been PD'D ready to go to its new home tomorrow!

Come on down and have a chat to us about mercurys amazing deals at the moment! There is some awesome savings to be had, if you get in fast it could be done in time for XMAS!!!

Mercury Simrad Yachting BEP Marine - Navico Group

New Simrad Recon in and on!! Ready for sea trials tomorrow. These are seriously cool pieces of kit, pop on in and check ...
17/09/2025

New Simrad Recon in and on!! Ready for sea trials tomorrow. These are seriously cool pieces of kit, pop on in and check out our demo unit in the show room, its even powered up so we can show you the freesteer remote up and running!

Well an awesome end to a full on week from the team with two repowers installed , 1slick 6.2 v8 petrol v8 conversion up ...
12/09/2025

Well an awesome end to a full on week from the team with two repowers installed , 1slick 6.2 v8 petrol v8 conversion up and running just awaiting a gearset to change the drive ratio, and a stunning DTS 4.2 tucked into the hull just awaiting loom and fluid connections next week.

If you are thinking its time to take advantage of modern power, torque, fuel efficiency and technology dont hesitate to get in touch, we love helping make dreams come true,

With options from Volvo Penta and Mercury we can get your boat moving.

Cant wait to see these both on the water for hand over next week!!!!

Marsden Cove Marina Mercury Marine New Zealand

28/08/2025
🔥🔥SO EXCITED! 🔥🔥The First three SIMRAD RECON Trolling motors have arrived with two more on the way!These units are amazi...
27/06/2025

🔥🔥SO EXCITED! 🔥🔥The First three SIMRAD RECON Trolling motors have arrived with two more on the way!

These units are amazing, I cannot wait to get the presold ones rigged up and, on the water,

One of these will be a display unit for stock so pop on down and have a chat so we can show you over its features!
🌊Designed for Salt Water!
🛥More Thrust than the Competition
🔋Multi Voltage 24 or 36 V
🖥Amazing integration into your Simrad/Lowrance MFD's, the unit acts as an autopilot to navigate you along a reef
🕹Intuitive Remote featuring a thumb-controlled joystick to jog your position!

Don't forget if you want anything else marine electronics, we are the local Authorized and Factory Trained Simrad/Lowrance Distributors and are always happy to do super sharp deals!

09/06/2025
Wahoo, fresh off the press, 2x New release Simrad Yachting NSS 4 12 inch units to go into a clients vessel we have alrea...
05/06/2025

Wahoo, fresh off the press, 2x New release Simrad Yachting NSS 4 12 inch units to go into a clients vessel we have already done a huge electronics refit in, he pre-ordered these as soon as the pr announcement came out and has been super patient!

And two more starters out the door, makes for 80! Yanmar starter overhauls in five years, with zero returns because we u...
20/05/2025

And two more starters out the door, makes for 80! Yanmar starter overhauls in five years, with zero returns because we use only genuine Hitachi parts, Previously, we were skeptical about rebuilding starters due to the availability of cheaper aftermarket alternatives. However, our experience has shown that these alternatives are infact quite inferior, with issues such as poorly secured brushes, poorly potted armatures, improper spotwelding and faster solenoid contact failure. Our overhaul process involves replacing all parts with genuine components, even in after market starters as one of these was, at a cost comparable to aftermarket units.
Our process includes ;
✅️installing new brushes and brush holders,
✅️ continuity across windings,
✅️Machining commutator or replacing the armature,
✅️Replacing the clutch assembly,
✅️Servicing the reduction or planetary set,
✅️Conducting bench tests to verify operation and check current and voltage patterns using a Pico scope to verify all fields are operational. (A copy of which is included to the client)

Address

1/82 Marsden Bay Drive
Marsden Point
0118

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Alerts

Be the first to know and let us send you an email when Marsden Cove Marine Ltd. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share

Category