Fast Lane Plastics

Fast Lane Plastics plastic repair and fabrication

06/27/2017

Another airport visit for Chipper, our $8995 two place airframe kit, and some very significant testing progress:

Two way speed test check using GPS in dirty (non-aerofaired) condition with tundra tires

Conditions:

Rotax 912UL, [80HP maximum @ 5800RPM]

Test run @ 5000 RPM == 52HP == 62% == 2200 RPM @ Propeller (2.27 reduction ratio)

[for reference, see
fil:///C:/Users/Owner/Downloads/OM_912%20Series_ED4_R0%20(2).pdf
PAGE 5-2]

Estimated fuel flow: 3.83 gallons per hour

flaps 15 degrees
21" tundra tires
ALL BRACING & STRUTS -- UNFAIRED (DIRTY)
with wind -- 78 KTS groundspeed
into wind -- 48 KTS
average -- 63 KTS (73 mph)

Estimated fuel economy in this configuration: 19 miles to the gallon.

With long range 28 gallon tanks installed, estimated range: 532 miles to dry tank. This will improve dramatically after the bird is cleaned up.

It seems that hitting 100mph in clean aero faired configuration with smaller wheels just might happen. 😎

ALL INFORMATION SUBJECT TO CHANGE AND FURTHER TESTING.

P.S. > Where's Chipper in this photograph???

05/27/2017
03/24/2015
02/18/2015
Patch the preheat pipe
01/31/2015

Patch the preheat pipe

Working on a 22r
01/31/2015

Working on a 22r

Address

Atwater, CA
95340

Telephone

(209) 756-5913

Website

Alerts

Be the first to know and let us send you an email when Fast Lane Plastics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share