11/20/2025
***long read*** Ill do a live vid with the protype tractor for ones who hate to read.. like me lol..
We learned alot! The 3 EZ-Pull versions prior.
Sooo... here's the rundown...
The EZ-Pull 3 Chassis is the successor of our original EZ-Pull 1 and 2 and 2.5 chassis. In addition, we’ve introduced various upgrades to make it even better than the previous ones! These builds are tailored for you with the highest level of quality. Taking performance, quality and high detail builds to the next level. Each build with come with high detail digital renderings you can veiw before we begin the build process. We want your build to be an experience your involved in down to smallest details.
Each EZ-Pull 3 chassis will come with a unique serial number on the chassis and manual. So you’re always guaranteed to get an original and authentic RC PullingParts EZ-Pull chassis. You're design and all details will be saved in a customer folder to ensure consistency for replacement parts or future upgrades
EZ-Pull 3 body clamping system
Body clamping system
A common issue is holding down the body during a pull. Using velcro tape or other adhesives is often necessary to keep your body in place when pulling.
With the EZ-Pull 3 chassis, this is no longer an issue. The chassis has an integrated body clamping system. You can simply push on the body, and the clamps will clamp it down on the chassis.
On the side of the chassis, you find pushbuttons. Just push these to release the body when you need to do maintenance or swap batteries. The new one peice design is made from flexible nearly indestructible TPU material. This also offers quick removal in the event of an emergency.
Driveline
Gearbox
The EZ-Pull 3 chassis features a unique gearbox concept that accepts both 10th and 8th scale brushless motors.
You can change gears within a matter of minutes. It is also possible to flip the gearbox 180 degrees in the chassis to allow the brushless motor to be mounted either in the front or rear position.
Rear axle
EZ-Pull uses a modified T-Maxx differential, with a 7075 CNC machined aluminum spool inside and a hardened 6mm D-shaft. An aluminum CNC machined bracket holds the rear axle in place. On the sides, 3D printed Polycarbonate/carbon fiber axle supports with bearings ensure optimal support for the axle.
A steel heavy-duty universal joint connects the gearbox and rear axle with a hardened 6mm D-shaft.
Electronics
The EZ-Pull 3 chassis comes with various options to place your electronics. By default, we mount a full size metal gear steering servo in the front of the chassis.
Everything is nicely covered by 3D printed cover plates, which you can quickly remove to access the compartment for a quick battery change or other adjustments. Bodys are printed from temperature resistant ASA. This material is known for durability. All of the functionality 3d printed parts are made from PC-CF. This is one of the most durable impact resistant materials available
Hitch & rear section
The EZ-Pull 3 chassis comes with a 10mm thick aluminum hitch plate with two adjustment holes to bolt the hitch into. The hitch itself has a 0.6″ adjustment slot and can be flipped upside down, which will give you many adjustment possibilities.
The wheely bars are adjustable in height as well. Loosen up two 3mm bolts, and you can slide them up or down in the chassis.
Thanks to these adjustment options, you can use many different tire sizes, for example:
Full replica and RTR projects are also available, but keep in mind these take longer to produce due to the extra detailing work along with cost
EZ-Pull 3 starts at 800$
Full 6061 aluminum chassis (optional powdercoat included)
Aluminum front axle
Modular gearbox 80t aluminim gear
Front/Rear/Hitch weightbars
Adjustable hitch & wheelybars
Steering servo included
3D printed cover plates
Aluminum front and rear rims with tires.
3D printed bodyset of choice
Rollcage paint and detailing of choice
Your choice of rear tires pending stock and avaliblity.
Optional
Custom weights
Custom designed Aluminum wheels
Decal kits
Pre-installed electronics
Carbon fiber chassis kits
Lead time is approximately.
2 months depending backlog.
