On The Fly Skiff Co

04/09/2026

We realize we haven’t posted in a little bit and wanted to share what we have been up to. Busy first quarter and it’s safe to say everyone is enjoying the good weather. Between the metalwork getting to another level and getting these winter resto’s done, we have stayed pretty busy. Excited to get after it this summer.

12/03/2025

Moondust on Castle Tan with flat black trim… All that needs to be said, but on another note, a ONE-week-turnaround on new extra gritty non-skid, color matched keel guard, a little wiring work, and a pro-grade transducer install. Guide is back guiding in no time.

11/25/2025

Take a look at this older model Pathfinder in for a new gas tank, full rewire, raw water system, new in house custom dash lay out, non skid, and engine service. No job is too big or too little. Thank you to our return customer in trusting us to give this Pathy a new lease on life!

11/12/2025

After making some necessary changes at the shop, we now rolling more efficiently than ever. Take a look at this insurance job that we did on a Vantage VHP paired with a 175 Merc. In addition to flipping and doing a full gel coat respray on the hull, we had a ton of impact damage to fix. No worries for the team as we had it done and back to our Georgia customer in three weeks! Working hard through this flood tide season!

#

11/12/2025

10/13/2025

Check out the revival to a Lowcountry Landmark(IYKYK). The owner of this 2008 Lostmen that did not want to buy a new boat but rather have us restore his back to how it left the factory. On top of cutting the boat in half and flipping it, we also rewired it, repowered it with a new Tohatsu, all new metalwork done in house, new Powerpux, new upholstery, new non-skid, and the list goes on. He’s got a lifetime built boat! Give us a call anytime and thank you for the continued support!

#

09/16/2025

We got the joy of doing an entire rework of a classic 1997 Jones Brothers Cape Fisherman. What started as a gas tank swap turned into new stringers and floor as well. As you can see we had to replace all of the wood with composites but also laid up a stronger backbone for this customer to enjoy the boat for generations to come. Something like this we would give a lifetime warranty for. Solid to say the least. After we got through the bones, we decided to finish it out properly. Everything in house and no stone left unturned. Obviously a new gas tank, but a full rewire with all new accessories, all new aluminum work, new console, new aluminum and stainless steel accent trim, engine service, trailer axles and welding/lighting, Powerpux and Minn Kota trolling motor system, JL Audio M6 sound system, and the Mercury to top it off. Safe to say this is one will be around for a while. Get with us for any of your needs, not just full restorations like this!

#

08/29/2025

With the summer nearing an end, we wanted to say thank you for another summer in the books! Although we haven’t been posting as much, you can see we still have been very busy. A little mix of restorations all the way through to small jobs like wiring and re-rigs is what kept us busy. Swipe through and we promise to post more soon! Please don’t hesitate to reach out for a free quote. Happy Friday.

02/28/2025

Over the past month or so, we decided to start us off with a stock amount of finished metalwork. As we continue to build more daily, we wanted to start off with what will be our online marketplace. Although you’ll need to reach out to us about these, in the future we’ll have a website for you to order these off of and have them delivered to your doorstep. All are finished in polished anodized but we can easily powder coat with about a week or so turnaround on the casting platforms, and about a two week turnaround on powdercoating poling platforms and larger pieces.

If we don’t have a size in stock, we can always pump one out for you within a week. DM or call 843-225-3023 for more info.

01/30/2025

Can’t get enough of this Bahama Classic. 2007 23 Albury in for a new gas tank. With everything done in-house, it was a very straight forward process. The hull, hard top underside, and non skid matching was the icing on the cake. Scroll through to see our work, and call if you need a quote on a new tank! 🇧🇸 💪