MatterHackers, Inc.

Call Directions Website Contact the business

MatterHackers, Inc. MatterHackers is dedicated to enabling 3D printing. MatterHackers is headquartered in beautiful Orange County, California.

Order online for fast shipping at www.matterhackers.com, and call or email us with questions about anything digital fabrication. For every kind of digital fabrication - 3D printing, CNC, resin printing, and more, we are working hard to enable people to turn the ideas they have into the things they use.

If you’ve been eyeing the A1 but wishing it were bigger, this is that printer.The Bambu Lab A2L keeps what made the A1 s...
10/19/2026

If you’ve been eyeing the A1 but wishing it were bigger, this is that printer.

The Bambu Lab A2L keeps what made the A1 series work and scales it up. Same open-frame layout, same automatic calibration and bed leveling, same AMS Lite multi-color setup, now across a 330 x 320 x 325mm build volume. The parts that didn’t fit before fit now, and nothing about how you use it changes.

A few things got stronger along the way. Adaptive Vibration Compensation holds down ghosting on tall prints, which matters more as parts get bigger. The nozzle takes 0.2, 0.4, 0.6, and 0.8mm so you can chase detail or lay down a draft fast, and the servo extruder has a filament cutter built in. Pair AMS Lite with second-generation AMS units and you can run up to 19 colors in one print. AI monitoring catches runout, nozzle clumping, and air printing, and Silent Mode runs at 49dB.

Order by 1pm PT and it ships the same day, free on orders over $35, with 3% back in rewards. Our expert service team is here if you need a hand.

Available now at the link in bio “AS SEEN ON MH”!

Printing fifty of anything takes days. The Mayku FormBox takes a different route: heat a plastic sheet, pull it down ove...
10/19/2026

Printing fifty of anything takes days. The Mayku FormBox takes a different route: heat a plastic sheet, pull it down over a shape with a vacuum, and you have a reusable mold in minutes. The shape can be a 3D print you already made, so the master comes off your printer and the copies come out of the mold.

Once you have the mold, what goes in it is up to you. Concrete, plaster, resin, silicone, soap, foam, Jesmonite, even chocolate or ice. The forming bed is 200 x 200mm with 130mm of draw depth, the ceramic heater runs 160 to 340°C for PETG and polystyrene sheets, and it works with any household vacuum under 2000W using the included adapter. It arrives with 40 sheets, a kilogram of casting material, three starter projects, and a two-year warranty. $899.

Our expert service team is here if you want help getting started.

Shop Now → https://www.matterhackers.com/r/aLksOz

Snapmaker U1: Four toolheads that calibrate themselves.Every extra nozzle on a multi-material printer is another offset ...
10/18/2026

Snapmaker U1: Four toolheads that calibrate themselves.

Every extra nozzle on a multi-material printer is another offset that has to agree with the rest, and when they don’t, colors land a hair off and the seams show. The Snapmaker U1 handles that itself. Toolhead offset calibration, mesh bed leveling, input shaping, pressure advance, and flow compensation all run automatically, so the four heads stay in agreement without you measuring anything.

It watches the job as it runs, too. The U1 catches toolhead swap errors, build plate obstructions, and whether the plate is even in place, on top of filament runout, air printing, and power loss recovery. Underneath all that it’s a quick machine: 500mm/s toolhead speed, 20,000mm/s² acceleration, and 32mm³/s flow through 300°C stainless nozzles, across a 270mm cubed build volume, running Klipper firmware with Snapmaker’s OrcaSlicer build.

Order by 1pm PT and it ships the same day, free on orders over $35, with 3% back in rewards. Our expert service team is here if you need a hand.

Shop Now → https://www.matterhackers.com/r/g9D9ms

Introducing the Formlabs Alpha Resins, the material line built from scratch for the Form Studio 1. These are not Form 4 ...
10/17/2026

Introducing the Formlabs Alpha Resins, the material line built from scratch for the Form Studio 1.

These are not Form 4 resins carried over with a new label. They were formulated specifically for the Form Studio 1’s light engine, which is how they print faster, cost roughly a third of Formlabs’ General Purpose resins, and reach about double the elongation at break.

They are also the first 3D printing resins certified UL GREENGUARD Gold for low chemical emissions, and post-processed parts meet ISO 10993 requirements for long-term skin contact. That combination is what moves resin printing out of a dedicated ventilated shop and into an office, a classroom, or a spare room.
Grey, White, Black and Clear cover display-ready prototypes and presentation models at 100 microns, Alpha Model delivers the fine detail miniatures and scale models need, and Alpha Fast runs a full build volume in under two hours. All six ship in 1L cartridges starting at $28.99.

If this is your first resin printer, Launchpad will get it set up and calibrated for you, and our expert service team can help you pick the right resin for the parts you are actually making.

Shop Now → https://www.matterhackers.com/r/cN3mbm

Build your own Halloween Filament Bundle and the sixth spool is on us.The Halloween Bundle Builder lets you pick any six...
10/17/2026

Build your own Halloween Filament Bundle and the sixth spool is on us.

The Halloween Bundle Builder lets you pick any six Halloween-ready spools and you get the sixth spool for free. Pumpkin and mandarin orange, deep blacks, purples, and glow-in-the-dark, across PLA, PETG, ASA, and flexible TPU, in matte, silky, and specialty finishes, from MH Build Series and PRO Series to Bambu Lab. Mix materials freely: PLA for props that stay indoors, ASA for the decorations going out on the porch where UV and weather will find them, TPU for anything that needs to squish.

One tip if glow-in-the-dark is going in your cart. The glow comes from phosphor particles blended i nto the plastic, and those particles are abrasive, so run a hardened steel nozzle. Glow filament also charges brighter and holds longer the more light it gets beforehand, so a lamp near your display shelf earns its keep.

Free US shipping over $35, same-day shipment on orders placed by 1pm PT, and 3% back in rewards on every qualifying order.

Shop Now → https://www.matterhackers.com/r/DzOTsd

Your printer isn't the limit. Your resin is.Same printer, same process, every time. The resin is the only thing that cha...
10/16/2026

Your printer isn't the limit. Your resin is.

Same printer, same process, every time. The resin is the only thing that changes what the finished part can survive. Formlabs splits the library into four families. General Purpose and Model resins handle concept models and prototypes where detail and turnaround matter most. Engineering resins take over when a part has to survive something: High Temp for heat, Rigid for stiffness and dimensional stability, Flexible and Elastic for parts that bend and return, Tough and Durable for snap fits and living hinges, plus ESD and Flame Retardant for electronics and regulated environments. Medical resins are biocompatible for applications that contact a patient. Castable resins burn out clean for jewelry and investment casting.

The practical version: choose the resin from the part's job first, then print. A prototype that cracks during testing usually isn't a printer problem. It's a standard resin being asked to do an engineering resin's work.
Not sure which family fits your application? Our expert service team can help you work it out.

Shop Now → https://www.matterhackers.com/r/pjGZOE

Effortlessly print whatever design you choose on mugs, water bottles, and tumblers with the eufyMake E1 UV Printer.The r...
10/15/2026

Effortlessly print whatever design you choose on mugs, water bottles, and tumblers with the eufyMake E1 UV Printer.

The rotary attachment turns the E1 into a cylinder printer. It spins the object beneath the printhead so artwork wraps around it instead of stopping at a flat face, handling anything from 1.8 to 3.9 inches in diameter and up to 9.6 inches tall, with a dedicated mug mode for handles. It's still UV printing, so the ink cures instantly as it lays down and comes out with the same raised texture the E1 is known for, up to 5mm of relief at 1440 DPI. Run a finger across a finished tumbler and you can feel the design.

That makes drinkware one of the easier product lines to add. No wraps, no heat transfers, no specially coated blanks to source, just the blank you already stock and the file you want on it. If cylindrical products are where you're headed, the rotary is worth getting with the machine rather than adding it later.

Launchpad and our expert service team can help you get set up and printing.

Shop Now → https://www.matterhackers.com/r/gn7CJ2

Introducing the all new Formlabs Form Studio 1. Starting at $699.The Formlabs Form Studio 1 handles resin for you. Mater...
10/14/2026

Introducing the all new Formlabs Form Studio 1. Starting at $699.

The Formlabs Form Studio 1 handles resin for you. Material swaps run automatically, glove-free, in under a minute, so the part of resin printing that keeps most people away is largely gone. The Alpha Resins are low odor as well, which makes this a machine you can run in a room you actually spend time in.

It’s open, too. Open Material Mode is included with no license fee, so any 405nm resin works, not only Formlabs’. You get a 200 x 125 x 235mm build volume, 35 micron pixels with pre-tuned anti-aliasing, layer heights from 25 to 300 microns, and speeds up to 130mm per hour, with most parts finishing in under two hours. Five control systems track temperature, resin level, print force, and status, and it will text, email, or ping your phone when something needs you.

The Founders Edition is a limited run in Aqua, Teal, Violet, or Graphite with a Founders badge, and our Supreme package is a MatterHackers exclusive: build platform jig, Wash and Cure with rinse bucket, VOC extractor, Resin Tank Pro, four liters of Alpha and Tough resin, PRO Resin Cleaner, and Launchpad setup. The Founders offer runs through November 30 or while supplies last.

Shop Now → https://www.matterhackers.com/r/EGiqXT

10/14/2026

If you’ve ever tried to cut clear acrylic on a diode laser, you know what happens. Nothing.

Diode lasers run around 450 nanometers, which is blue light. Clear acrylic is transparent at that wavelength, so the beam passes straight through the sheet. The material never absorbs enough energy to cut. That’s why people reach for tinted or cast acrylic instead, or paint the back of a clear sheet just to give the beam something to grab.

The AtomStack Hurricane is a CO2 laser. 10.6 microns, deep in the infrared, and acrylic absorbs that wavelength almost completely. It cuts clear stock the first time, no tricks.

Here’s the part people don’t expect. CO2 melts the edge as it cuts, which leaves a flame-polished finish. Glossy, clear, finished, straight off the machine. No sanding, no torch, no polishing compound.

55 watts across a 50 by 30 centimeter bed, Class 1 enclosed so no goggles.

And if you’re anywhere near Orange County, come see it run. It’s at our Lake Forest showroom, and you can watch it cut before you buy it.

AtomStack Hurricane. Check it out at https://www.matterhackers.com/r/UCgBe2

Cut an inch of aluminum on your own shop floor.The WAZER Pro runs at 8,600 psi with 2.1kW of hydraulic power, cutting al...
10/14/2026

Cut an inch of aluminum on your own shop floor.

The WAZER Pro runs at 8,600 psi with 2.1kW of hydraulic power, cutting aluminum up to 1 inch and steel up to 3/8 inch across a 12 x 18 inch bed, holding 0.003 inch gantry accuracy. It cuts cold, using water and abrasive instead of heat, so there's no heat-affected zone, no warping, and no hardened edge to clean up afterward. Metals, glass, plastics, composites, tile, rubber, and foam all cut the same way, and it runs on standard filtered tap water.

It's built to keep going. Ninety minutes of continuous cutting and a 42 lb abrasive hopper mean long jobs run without stopping to refill, and the abrasive collection system keeps maintenance light. The design software is free and web-based, and takes .dxf and .svg straight out of whatever CAD you already use.

Launchpad expert setup is available for the Pro, and our expert service team is here for everything after that.

Shop Now → https://www.matterhackers.com/r/MWeD04

Address

Foothill Ranch, CA

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+18006134290

Website

Alerts

Be the first to know and let us send you an email when MatterHackers, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MatterHackers, Inc.:

Shortcuts

Share