On Point Custom Marine

10/19/2026

Bridging the logistics gap between both shop locations! No matter where you and your boat are located, your project is NOW only a phone call away from being effortlessly dropped off to either one of our shops located in Ft.Lauderdale and Tallahassee Florida.

10/17/2026

Biggest red flag 🚩 buying a “restored” boat has gotta be this one: new floor with no glass on the underside. Especially with wood core! All of those closed off compartments that hold moisture will just be evaporating straight into the wood. A floor done like this has 10 years max before it starts falling apart

10/15/2026

25 SeaVee HiTech rebuild just completed. The hi-tech models were built in the late 80’s extending into early 90’s. They feature composite construction from the factory, making them less involved projects compared to the other 25 classics. In this project we only needed to core the transom, fill the inboard cut out in the stringers, and installed single fuel tank in the motors place to act as ballast. The old saddles in the rear were removed (you could add deck storage here but this client wanted it closed off). We changed the cap to a flat profile. We glassed in all the deck panels while also lowering the normally 1” raised forward floor to being level with the rest of the deck. No more toe kicker! Fabricated a transom livewell and gave it a modern contender console! Finished off in Awlgrip Matterhorn white, Vivid Red boot stripe and Harbor Blue gelcoat bottom

10/15/2026

I love when the leaking tanks deteriorate the foam. Makes them come out almost effortlessly, but man does it smell!

10/14/2026

10/13/2026

Diving deeper into our 31 Contender transom redo.

10/11/2026

Another transom job going down. This one didn’t have any severe indications to a bad core but you never know what you have until you cut!

10/10/2026

Definitely one of the most commonly asked questions and debated things with people’s projects. Also one of the biggest subjects that’s full of misinformation and myths. If you can understand what I’m saying in this real, this may help you make a better informed decision on which coding fits your needs and budget.