BRUTE PERFORMANCE

05/29/2026

DP BRAKES EXTENDED KAWASAKI KRX 1000 BRAKE PADS

BACK IN STOCK!!

https://bruteperformance.com/products/ols/products/dp-brakes-kawasaki-krx-1000-brake-pads

The DP brake pads are an OEM replacement sintered metal compound. Ideal for everyday off-road and ATV use, they provide excellent all-round braking hot or cold, wet or dry. Where applicable a high-tech ceramic heat shield is applied to the rear of each back plate to reduce the heat transfer into the fluid and prevent brake fade. Lasting up to 3 times the mileage of most other brands they have one of the lowest wear rates on the market.

Standard depth has a pad thickness of .190 (comparable to OEM and other aftermarket pads)
Extended Depth has a pad thickness of .220

05/29/2026

Was not impressed with the smaller starter we adapted to the krx so we are now looking into a complete rebuild of your oem starter. As long as your internal armature is good we can replace everything around it.
This rebuild out performs a good working oem starter so we'll call it an upgraded rebuild. We are still looking for a complete bolt in replacement to make it bolt in easy but this is still a great option

05/28/2026

KRX 1000 BRUTE PERFORMANCE MOTOR MOUNTS TRANSMISSION MOUNTS

https://bruteperformance.com/products/ols/products/krx-1000-brute-performance-motor-mount-transmission-mounts/v/KRX-100-BRT-PRF-2-MTR

WILL FIT ALL YEARS AND MODELS KRX -KRX4

- Replace the soft weak rubber motor and transmission mounts with our polyurethane units
- Fixes the root cause of the motor/trans combo sagging out and sitting so close to the lower frame-
- No need to cover up the problem with a heavy metal plate
-Fixes the root cause of exhaust header cracking, separating or bending of the muffler mounts
-Solid 60A hardness means these will not sag, and are soft enough to eliminate harsh vibrations from transmitting to the chassis

MOTOR MOUNTS can be changed one at a time easily with everything in place

Grease inside and out during install will be your friend!!

05/28/2026

KRX 1000 HEAVY HITTER FRAME TAB SUPPORT KIT BIG BOY EDITION !!

https://bruteperformance.com/products/ols/products/big-boy-edition-krx-1000-heavy-hitter-frame-tab-support-kits

We’ve developed an even stronger version of our Heavy Hitter Frame Tab Support Kit. Designed for extreme use, this kit offers enhanced protection for those who race, rock bounce, or run larger tires. Please note that this kit requires welding. If you’re looking for a bolt-on option, check out our original Heavy Hitter Kit.

Fits: 2-seat and 4-seat Kawasaki KRX 1000 models
Installation Details are on the website!!!

KEY FEATURES
- It provides superior protection to prevent costly damage to the A-arm frame tabs on the front of your KRX 1000.
- Includes a new CNC-formed, one-piece front upper support, along with thicker support plates than our original kit.
- Powder-coated in textured black for a sleek, durable finish.
- Comes with 10.9 flanged hardware, compatible with the 17mm hex head of OEM hardware.

Kit Benefits
- Helps protect your front A-arm frame tabs from ripping out in the event of an impact.
- Enhances rigidity and overall structural integrity of the frame.

05/28/2026

05/28/2026

Spanner Wrench Sets!!

https://bruteperformance.com/products/ols/products/teryx-spanner-wrench-set - Teryx 800 spanner wrench set

https://bruteperformance.com/products/ols/products/spanner-wrench-set-for-fox-25-shocks - Set for fox 2.5 shocks

https://bruteperformance.com/products/ols/products/polaris-spanner-wrench-set - Polaris

https://bruteperformance.com/products/ols/products/krx-spanner-wrench-set - KRX

https://bruteperformance.com/products/ols/products/honda-talon-spanner-wrench-set - Honda Talon

https://bruteperformance.com/products/ols/products/can-am-maverick-x3-spanner-wrench-set - Cam-am Maverick X3

Easily adjust the preload of your Fox shocks with these Brute Performance made in the USA wrench set

We offer wrench sets that Fit Fox shocks found on the Kawasaki KRX, Wildcat xx, Polaris RZR, Can Am Maverick and Yamaha YXZ

05/27/2026

KRX FUSE BOX BOLT INSERTS
ALL YEARS KRX
SOLD IN SET OF FOUR
https://bruteperformance.com/products/ols/products/krx-fuse-box-bolt-inserts

BOLT ON THESE THREADED INSERTS THAT REPLACE THE STUBBORN FACTORY BRASS AND RUBBER ASSEMBLY THAT WILL SPIN AND GET STUCK ON THE WING NUT
ENCAPSULATED ON THE END TO PREVENT DIRT AND WATER FROM SEIZING THE BOLT TO THE INSERT

RE USE YOUR FACTORY WING NUTS

05/26/2026

Finally solving an age old problem on a krx. Any guesses?

05/26/2026

KRX 1000 BRAKE MASTER CYLINDER UPGRADE
We got plenty of them!
https://bruteperformance.com/products/ols/products/krx-1000-brake-master-cylinder-upgrade

Key Features:

- Direct Bolt-In Application: No modifications required for installation.
- Increased Line Pressure: Provides more braking power to handle demanding conditions.
- Larger Bore Design: Ensures a firmer, more responsive brake pedal feel.
- Extended Stroke: Optimized to push stock or larger 3-piston front calipers for enhanced braking performance.
- Larger Reservoir: Holds more brake fluid, reducing the need for frequent maintenance.

Common Braking Issues:

- Spongy pedals and reduced braking power can be caused by:
Installing new pads on worn rotors.
- A misadjusted rear parking brake, which reduces line pressure.
- Worn brake pads.
- Damaged wheel bearings, which may require multiple pedal pumps for effective braking.

05/26/2026

DP BRAKES CAN-AM X3 IN STOCK!!

https://bruteperformance.com/products/ols/products/dp-brakes-can-am-x3
165 PAD DEPTH
Can-Am X3 brakes are the same pad FRONT and REAR.

Sold in sets of 2-(4 Pads total) enough to do left and right sides if the machine

The DP Standard brake pads is a OEM replacement sintered metal compound. Ideal for everyday off-road and ATV use, they provide excellent all-round braking hot or cold, wet or dry.

Lasting up to 3 times the mileage of most other brands they have one of the lowest wear rates on the market. Very low levels of brake dust and no noise and no thermal cycle bedding-in required are also benefits of the DP Standard